Busellato, CNC, Casadei, Nesting
MA ID: | RC4 - 10651 |
Status: | Archived |
Price: | $32,500.00 |
Category: |
CNC Router (4-axis) |
Manufacturer: | Busellato |
Model: | Jet 6000 XL |
Year of Manufacture: | 2002 |
Condition: | Very Good |
Electric: | 400 Voltage 60 Cycle 3 Phase |
Busellato Jet 6000XL CNC Machining Center (2002) Total power 22 kW, 400v, 3PH 5 x 193 grid table Total of (12) sliding adjustable pneumatic pop-up stops that can be positioned along rail of right side, left side or rear of table as needed (1) Router spindle 7.5 kW, 400v, 3PH 24,000 RPM 10-position ride along tool changer (damaged) L-pattern vertical boring aggregate (11) Vertical spindles in the X-axis (10) Vertical spindles in the Y-axis (1) Spindle is shared in the X and Y axis (2) Horizontal boring aggregates in the X-axis, each having one opposing spindle (2) Horizontal boring aggregates in the Y-axis, each having one opposing spindle Full length front bottom foot emergency wire (4) Foot pedals (2) Electronic safety floor mats Operator pedestal controller Operator hand-held controller Left side work table Approximately 5 x 14 Sides and rear of machine steel safety fence Free-standing pedestal controller Free-standing operator/electrical control cabinet Air conditioned electrical cabinet Cosmotec EVE14-00-220 Tool holders as shown 30 kVA transformer s/n 5269 Busellato Jet 6000XL CNC Machining Center (2002) Total power 22 kW, 400v, 3PH 5 x 193 grid table Total of (12) sliding adjustable pneumatic pop-up stops that can be positioned along rail of right side, left side or rear of table as needed (1) Router spindle 7.5 kW, 400v, 3PH 24,000 RPM 10-position ride along tool changer L-pattern vertical boring aggregate (11) Vertical spindles in the X-axis (10) Vertical spindles in the Y-axis (1) Spindle is shared in the X and Y axis (2) Horizontal boring aggregates in the X-axis, each having one opposing spindle (2) Horizontal boring aggregates in the Y-axis, each having one opposing spindle Full length front bottom foot emergency wire (4) Foot pedals (2) Electronic safety floor mats Operator pedestal controller Operator hand-held controller Left side work table Approximately 5 x 14 Sides and rear of machine steel safety fence Free-standing pedestal controller Free-standing operator/electrical control cabinet Tool holders as shown https://www.youtube.com/watch?v=cJVsFleXgqo
|
|
Shipping Footprint: | 338 (length) x 93 (width) x (height) |
Weight: | 16500 lbs |
All Information including Photos and Videos are supplied by a 3rd party Source.
Please confirm all data before committing to a purchase.
*Subject to credit approval. Additional programs available.
Please confirm all data before committing to a purchase.
*Subject to credit approval. Additional programs available.