Finishing > Sand/Denib/Clean

SlipCon Perfection BBDD BrushDenibbing Sander

MA ID: FSA-11296
Price: $39,500.00 -or- as low as $798.29/mo.*
General Location: Midwest
Category:

Sand/Denib/Clean

Manufacturer: SlipCon
Model: Perfection BBDD
Year of Manufacture: 2007
Condition: Very Good
Electric 460 volt, 60 cycle, 3 phase

  • Very good condition, completely cleaned and checked, replaced VFD and bearing block.
  • 460 Volt, 3 Phase, 60Hz, 50 Amp

Specifications:

  • 53” wide capacity
  • 2” Thickness capacity
  • Motor for sanding rollers, 2 @ 2.5 kW (3.4 HP)
  • First unit: 16” diameter rotating brush sanding roller (11” core) with 56 helical grooves, variable speed (10 – 300 RPM), clockwise/counter-clockwise rotation and separate motorized height adjustment
  • Second unit: 16” diameter rotating brush sanding roller (11” core) with 56 helical grooves, variable speed (10 – 300 RPM), clockwise/counterclockwise rotation and separate motorized height adjustment
  • Third unit: 11 @ 10” diameter rotating sanding discs with 24, 3” grooves mounted on a disc station that oscillates from left to right with separate height adjustment of the disc-station (to run discs only or rollers only or everything together)
  • Motor for disc station, 2.5 kW (3.4 HP), 50 – 300 RPM with clockwise and counter-clockwise rotation
  • Motor for disc station oscillation: 0.5 kW (0.67 HP) at 10 – 60 RPM
  • 10” Diameter panel cleaning brush with 2.5 kW (3.4 HP) motor at 50 – 150 RPM controlled by separate potentiometer
  • Pneumatic blow off station timed to run only when material is under unit
  • Vacuum bed conveyor belt with 7.5 kW (10 HP) vacuum motor
  • Feed belt with 1.8 kW (2.4 HP) variable speed motor
  • Separate variable RPM adjustments for discs and rollers
  • Motorized thickness adjustment
  • 5 Spring loaded hold down rollers
  • Motorized height adjustment of hold down rollers
  • PLC with 10” color HMI touchscreen
  • Eight 4” diameter dust outlets on top of machine
  • Vacuum blower outlet on end of machine has a 200 mm (7.9”) outlet
  • Switch manual/automatic (start machine from control panel or from finishing line)

Technical Data:

Max. working width

1350mm (53”)

Max. thickness of work piece

200mm (2”)

Motor disc station

2.5 kW (3.4 HP), 50 - 300 RPM

Motor disc station oscillation

0.5 kW (0.67 HP), 10 – 60 RPM

Motor sanding rollers

2 @ 2.5 kW, 10 – 300 RPM

Diameter sanding roller

Max. 400mm (max. 16”)

Motor feed belt

1.8 kW (2.4 HP) 6 – 40 FPM

Motor vacuum bed

7.5 kW (10 HP)

Voltage

460 V, 3 PH, 60 Hz, 50 Amp

Weight

7,700 lbs

Length/Width/Height

109.4” x 78.7” x 83”

US standards in measurement are an approximation

Ready for van freight, prep for flatbed trailer - $150.00

 

 

 

Rigger: Not Required
All Information including Photos and Videos are supplied by a 3rd party Source.
Please confirm all data before committing to a purchase.
*Subject to credit approval. Additional programs available.