SCM S-1000 FRT Edgebander
2015 SCM S-1000 FRT Edgebander. A loaded up, SCM edgebander at this price??!!!
MA ID: | EBS - 11864 |
Status: | Archived |
Price: | Call For Price |
Category: |
Edgebanders -Single Sided |
Manufacturer: | SCM (SCMI) |
Model: | S-1000 FRT |
Year of Manufacture: | 2015 |
Condition: | Very Good |
2015 SCM S-1000 FRT Edgebander
Has been used in a medium to lower production facility. It is in average to above average working condition and is under power for inspection.
Stations lay out as follows; Adjustable Infeed Fence with Pneumatic Panel Spacing Premill (2 motor, 5.25hp ea. counter-rotating) with Diamond tooling Jump Station, PLC controlled Application and pressure (4 rollers, 1 powered) End Trim (2 motor, 0.5hp) Top and Bottom Rough Trim (2 motor, 1.5hp) Top and Bottom Fine Trim / Radius (Servo Driven 2 motor, 1.5hp) Corner Rounding Unit (2 motor @ 0.80hp ea. Designed to round corners on 3mm Edgebanding) Top/Bottom Profile Scrape (Top and Bottom Profile scrape) Glue Scrape (Top and Bottom glue and PVC Flushing scrapers) Buffing (Top and Bottom Buffing, designed to make a smooth edge on the banding Heat This is designed to make the machined surfaces shine
Technical Specifications: Glue Pot Unit: Heating Time Approx. 8-10 min. Pot/Hopper Capacity 1.1 - 8.8 lbs Pre-milling Station: Horsepower 5.25 HP ea. RPM 12,000 RPM Max. Stock Removal 90mm Diameter/Bore/Height 100mm/30mm/49mm End Cutting Trimming Station: Horsepower .50 HP ea. RPM 12,000 RPM Tilting Blade Diameter/Bore 0-15 degrees Flush Edge Trimming Unit: Horsepower 1.5 HP ea. RPM 12,000 RPM Cutting Tools 70x20x16mm Tiltable Edge Trimming Unit: Horsepower 1.5 HP ea. RPM 12,000 RPM Cutting Tools 70x20x16mm (w/3mm knives) Corner Rounding Unit: Horsepower 80 HP RPM 12,000 RPM Cutting Tools 3mm Inserts Scraping Unit (Profile) 2 and 3mm inserts Scraping unit (Glue) Straight Inserts Buffing Unit; Horsepower .25HP RPM 3000RPM Diameter/Bore 152mm/17mm
Feed Motor HP 2.5HP Feed Speed 40/60 Feet Per Minute Frequency Converter 200Hz Pneumatic Pressure 90PSI
NOTE; The conveyor in the photos is not a return....it was used as a panel support. It is not included in this sale. This is a nice machine and will go right to work! Go see it under power! |
|
Shipping Footprint: | 25 (length) x 5 (width) x 6 (height) |
Weight: | 5500 lbs |
Please confirm all data before committing to a purchase.
*Subject to credit approval. Additional programs available.