Disc-Station: - 16 sanding discs 250mm (10”) diameter, each with 24 keyways 75mm (3”) long
- Gearmotor 2 x 1.5 kW (2HP)
- Variable disc speed 50-300 rpm by frequency converter
- Excentric orbital disc movement (patent pending)
- Separate height adjustment of the disc-station (to run discs only or rollers only or everything together)
- Electronic digital display to show height of disc-station
- Rotating Roller Spindles:
- Two spindles 90° to the feed, spindle diameter 50mm (2”), for maximum brush diameter 400mm (16”)
- Strong gearmotor each 2.2 kW (3HP) with external coolers
- Variable spindle speed 14-300 rpm by frequency converter each spindle, separately adjustable
- First spindle turning with the feed, second spindle against the feed
- Basic Machine:
- Closed machine frame
- Spring loaded hold down rollers for holding down narrow work pieces, pre-adjustable in height, linked to height adjustment of spindles
- Vacuum feed belt to hold down small work pieces with strong vacuum motor 7.5 kW (10HP)
- Through feed by feed belt with variable speed 3-15m/min (8-50 ft/min) by gearmotor 1.5 kW (2HP)
- Automatic centering of feed belt, pneumatically controlled
- Constant height of through feed, possible to put machine in finishing line
- Maximum height of work piece 100mm (4”)
- Motorized height adjustment of sanding units by gearmotor 0.37 kW (0.5HP)
- Electronic digital display for showing height of work piece
- Sensor activated pneumatic oscillating blowing device for cleaning the work piece at the end of the machine
- Antistatic brush strip device
- Control panel at left side
- Emergency off pull line at infeed and outfeed
- Infeed control with emergency stop if work piece is too thick
- Emergency off by opening doors
- Switch manual/automatic (start machine from control panel or from finishing line)
- 480V, 60Hz, 3PH, air connection 6-8 bar
- Dust extraction outlets 3 x dia. 80mm (3.2”) (blowing device), 4 x dia. 140mm (5.6”) (rollers) and 1 x dia. 200mm (8”) (vacuum)
- Plexiglas windows both sides
- Connection for compressed air supply 1 bar for cooling electric cabinet box, with water and oil separator
- PLC - Power-Panel Control, colored touch panel, strong PLC, menu controlled functions like manual mode – creating a program, storing a program, loading a program, different pin-areas, choice of pin, service-function, connection card for connecting machine to PLC of finishing line
- Technical Data:
Max. working width | 1350mm (53”) | Max. thickness of work piece | 100mm (4”) | Motor disc station | 2x1.5kW, 50-350rpm | Motor sanding roller | 2x2.2kW, 14-350rpm | Diameter sanding roller | Max. 400mm (max. 16”) | Speed of feed belt | 3-15m/min (8-50 ft/min) | Length/width | 2980mm/2150mm (118”/86”) |
US standards in measurement are an approximation
|