Edgebanders > Edgebanders -Single Sided

Homag KL 310 single sided bander with low hours

MA ID: EBS-11070
Price: $39,000.00 -or- as low as $788.19/mo.*
General Location: South East

Edgebanders -Single Sided

Manufacturer: Homag
Model: KL 310
Year of Manufacture: 2004
Condition: Good

Adjustable Infeed Fence

Homag Unit #0005

  • with digital mechanical counter

Pre-Milling Unit

Homag Unit #3481

    with two (2) motors 3 kW, 150 cycle, 9000 rpm

    for max. tool diameter of 125 mm (4-15/16")

    equipped with trimming column

    two (2) horizontal and cross slides with spindle adjustment

    electro-pneumatic horizontal jump movement of first motor

    two (2) dust extraction hoods

  • air jet for panel cleaning

    with two (2) DIA jointing heads 125 x 35 x 30 mm
(4-15/16” x 1-3/8” x 1-1/8”), DKN, z = 2 x 3

  • workpiece thickness 30 mm (1-1/8")
  • includes electronic frequency inverter for control of motor speed and braking

 Noise Protection Stepped

Homag Unit #0424

    for pre-trimming unit

    allows for inlay of long strips

    centralized dust extraction port


Panel Pre-Heater

Homag Unit #2325

    quartz lamp for heating substrate edge before glue application

    for improved edge quality and optimum bonding

 QA 34 Quick Melt Gluing Unit

Homag Unit #2123

    specially designed by Homag - the original innovator of the quick melt system

    lower reservoir unit is designed with only seven (7) wearing parts,
which allows for ease of adjustment and reduces maintenance costs

    ideally suited for quick heat-up time and color changes

    one bolt secures lower unit to drive mechanism

    special coupling eliminates alignment of universal drive joint

    digitally displayed thermostat for both upper and lower unit, along with heated glue roller allow for excellent control of temperature for optimum bonding results

    individual adjustment for front and rear glue gates

    upper reservoir for glue granules

    glue roller diameter 34 mm (1-11/32")

    lower melting unit equipped with automatic control of glue level

 Glue Roller Drive

Homag Unit #2141

    eliminates glue charring on glue roller

  • lengthens pot life of glue during idle running time of machine

    thermostatically controlled activation initiates glue roller drive when lower unit reaches melting temperature while feed track is stopped

Clamping Device for Glue Pot

Homag Unit #2143

  • electro-pneumatic clamping of glue applicator at trailing edge of panel
  • ensures consistent glue line


Glue Container Back-Off

Homag Unit #2145

  • in case feed track stops

 Multi-Purpose Magazine with Single Coil Horizontal Table

Homag Unit #2999

    capable of running coiled material, strips, and solid wood bands

    easily changed from one application to the next with the flip of a
switch, conveniently located on the movablecontrol pendant

    infeed angle 8°

    edge thickness 0.4 mm to 20 mm (0.016" to 25/32")

  • edge height 12 mm to 65 mm (15/32" to 2-9/16")

    processing limits 900 mm² (1.39 sq. in)

  • edge length 260 mm (10-1/4")

 Clipping Unit

Homag Unit #2445

    designed for today's popular use of thick coil PVC

    for use with single-roll table magazine

    max. edge thickness 3.5 mm (0.14")           

    max. edge height 65 mm (2-9/16")

    PVC processing limits 135 mm² (0.19 sq in)

    veneer processing limits 100 mm² (0.15 sq in)         

    max. roll diameter 900 mm (35-7/16")        

Magazine Height Adjustment

Homag Unit # 2460

    with threaded spindle adjustment and digital readout

    adjustable +/- 10 mm (+/- 13/32")

Pressure Zone for Gluing Section Type C

Homag Unit #2507

    one (1) driven pressure roller 160 mm (6-5/16") diameter

    six (6) secondary pressure rollers 70 mm (2-3/4") diameter

    with pneumatic pressure control for straight edges

    centralized manual adjustment for edgeband thickness with
digital mechanical counter

 Snipping Unit HL 05

Homag Unit #3054

    for straight and chamfer snipping

    with two (2) motors 0.4 kW, 200 cycle; 12,000 rpm

    equipped with self-aligning industrial grade ball slides and rails

    adjusting device for manual resetting from chamfer to straight snipping

    edge thickness

  • straight max. 20 mm (25/32")
  • chamfer max.  3 mm  (1/8")

    max. edge height 65 mm (2-9/16")

    with two (2) TCT saws 120 mm x 3.2 mm (4-3/4” x 1/8”), z = 20

  • includes electronic frequency inverter for control of motor speed
    and braking


Adjustment Chamfer, Straight

Homag Unit #3114

    for automatic re-setting from straight snipping to chamfer snipping

    manual motor adjustment required in case of modifications of edge thickness

 Top & Bottom Flush Trimming Unit

Homag Unit #3209

  • motors positioned one above the other, 1.5 kW, 200 cycle; 12,000 rpm
  • angle adjustment +/- 1°

    with two (2) carbide tipped trimming cutters, 70 mm x 25 mm
(2-3/4” x 31/32”), HSK 25, z = 4

  • motors running against direction of feed
  • motors manually adjustable with digital mechanical counters
  • height adjustment with top pressure beam
  • includes electronic frequency inverter for control of motor speed and braking

Set of TCT Rough Trimming Cutters ”I” System

Homag Unit #3900

  • in place of standard tool
  • two (2) ”I” TCT cutters 70 mm x 25 mm (2-3/4” x 31/32”),
    t=4, HSK 25 R
  • with integrated chip collecting system
  • up to 95 % of chips collected
  • dust extraction capacity reduced by approx. 50 %
  • high processing quality due to cleaner workpieces

 Bevel Trimming Unit

Homag Unit #3216

  • with two (2) motors, each 0.4 kW, 200 cycle; 12,000 rpm
  • edge thickness 8 mm (5/16")
  • panel thickness 60 mm (2-3/8")
  • tilting range 0° to 30°
  • with two replaceable carbide insert trimming cutters
    70 mm (2-3/4”) x 14.3 mm (0.56”) x HSK 25,z = 4
  • motors are running against direction of feed
  • motors and side copy wheels are manually adjustable with digital mechanical counters
  • height adjustment with top pressure beam
  • quick disconnect electrical plugs


Set of “I” System Diamond Cutters - Straight

Homag Unit #3905

Open Space

    600 mm (23-5/8”) available for later addition of work unit(s)


Noise Reduction Enclosure

Homag Unit #0415/0425

    for edge trimming section

    with individual dust extraction ports

    with viewing windows

  • illuminated for ease of operator inspection

 Open Space

    570 mm (22-7/16”) available for later addition of work unit(s)

Top & Bottom Edge Buffing Unit

Homag Unit # 4400

    with two (2) motors .25 kW, 60 cycle, 2850 rpm

    max. panel thickness 60 mm (2-3/8")

    with vertical, horizontal and angle adjustment

    equipped with two (2) cloth buffing wheels 

150 mm x 50 mm x 25 mm (5-29/32" x 1-31/32" x 31/32")

Electronic Control

    control with programmable memory (PLC)

    indication of all inputs and outputs by means of luminous diodes (LED)

    integrated line controlfor remote control of processing units

    multi-tasking control of PLC for precise unit operation

    part number in machine at choice

    compatible interface to all Homatic input systems

    recommended environmental temperature

      min. +5° C (41° F), max. +35° C (95° F)

Monitor Input NC 21

Homag Unit # 6313

    user-friendly operator interface for control and administration of processing programs of a machine



    industrial computer 68040, 16 MByte RAM

    one (1) PCMCIA storage card, 170 MByte for storage of approx.
20,000 operation programs

  • one (1) open slot for spare PCMCIA card for data back up

    multi-tasking real time operation system OS-9, with Windows-style display system

  • Windows standard menu for program selection
  • menu-driven program generation

    bus connection (VME-Bus) for PLC, for quick and safe data transmission

    10.4" LCD flat panel display with PC compatible keyboard,
installed in operator console

    network connectable (EtherNET), additional hardware and software required

    possible telephone diagnostics

  • line control data transmission via fiber optic cables for increased processing speed and isolation from high frequency noise


    simple programming of operation programs

    off-set allowance for compensation of tool wear in conjunction with stepless axes

    production according to operation programs

    PLC ladder diagrams can be displayed on machine monitor

  • modem available for customer's use for remote diagnostic purposes
  • modem must be returned within six (6) months of acceptance of machine at customer's facility or purchased under separate maintenance agreement contract
  • two (2) telephone lines at the machine must be provided by the customer,
    one (1) telephone line to be equipped with a receiver
Rigger: Not Required
All Information including Photos and Videos are supplied by a 3rd party Source.
Please confirm all data before committing to a purchase.
*Subject to credit approval. Additional programs available.