Finger Jointers and End Matchers

Doucet model SPFM high production end matcher 2011

Doucet model SPFM high production end matcher 2011

MA ID: FJ M-11594
Price: $84,980.00 -or- as low as $1,717.45/mo.*
General Location: Eastern Canada
Category:

Finger Jointers and End Matchers

Manufacturer: DOUCET
Model: SPFM End Matcher
Year of Manufacture: 2011
Condition: Very Good
Electric 460 volt, 60 cycle, 3 phase

Machine CapacitiesHigh Production End Matcher For Strip or Plank Flooring. 10" to 96" board length capacity; 3/8" to 3/4" thickness capability minimum width 1 3/4"; maximum width 3 1/4", 5 1/4" or 8 1/4" (relative to traverse 6", 9" or 12" bar spacing). End-Matcher model SPFM is designed for high production and is suitable for production capacities of 20,000 to 30,000 board feet of random length Strip or Plank Flooring per shift.Specifications: 
-- High precision ductile iron chains, hardened steel sprockets, massive traverse bars 
-- 20 HP Electric Motor with a Variable Speed Drive up to 80 feet per minute 
-- 5 HP spindle motors 
-- 9 inch center to center standard traverse bar spacing 
-- Fully enclosed machining centers, all adjustments made easy by dial indicators 
-- Dynamic braking on all spindle motors 
-- Electronically controlled chain lubrication systemStandard Features: 
-- 27` long by 96" wide feed conveyor 
-- 3" Pitch ductile iron chains, linked by 3/4" press fit dowel pins, driven by 15" hardened steel sprockets 
-- Massive 2" by 3/4" traverse bars suitable for machining 0.375" to 0.75" thick flooring 
-- Air Bag & Belt hold-downs 
-- 9" Center to center traverse bar spacing (6" and 12" possible) 
-- Feed speed up to 80 FPM powered by a variable flow 20 HP hydraulic power unit 
-- Injection type chain lubrication system 
-- (3) 36" Wide side-shift conveyors 
-- 3" Diameter side-shift rollers dual driven by 1 HP motors 
-- Tongue and groove machining centers laid out on opposite sides of the feed conveyor 
-- Machining centers are totally enclosed and equipped with interlocked doors 
-- (2) 6" Dust collector connectors on lower side of each machining center (1000 CFM each) 
-- Tongue machining center with 3 
- 5HP spindle motors, (trimmer, top and bottom tongue groovers) 
-- Groove machining center with 2 
- 5HP spindle motors, (trimmer and horizontal groover) 
-- Tooling system for regular or beveled top end-matching 
-- 12" Dia. x 30mm bore trim saws 
Rigger: Not Required
All Information including Photos and Videos are supplied by a 3rd party Source.
Please confirm all data before committing to a purchase.
*Subject to credit approval. Additional programs available.