Manufacturer: BRANDT
Model: KDN-650 C OPTIMAT
Date of Manufacture: 2007
Electrical Specs: 230 3 Ph, 60 Cy
Condition: Very Good
Machine Description:
2007 Brandt Optimat KDN 650C Edgebander (Serial # 0-261-02-2789)
Price = $19,000.00
PC-16 Program Control:
- Color matrix LCD screen display
- 8mb RAM
- Manual push button controls or program control operation
Equipped with digital height indicator.
Integrated electronic line control system for increased reliability and diagnostic assistance. No limit switches used for setting operating units.
Control panel located at machine infeed for operator convenience.
Universal automatic magazine for strip and coil feeding.
Large coil table (800 mm diameter) to accommodate large coils of 3 mm PVC.
Hot melt granulate glue application system with twelve-minute heat-up time.
Quick-change glue tank for easy maintenance and glue color change, if necessary.
Reversible rotation of glue application roller. Retractable glue roller.
Strengthened precutter for cutting PVC (max. 3 x 45 mm) from the coil.
Infrared radiant quartz heating unit between glue roller and pressure zone for optimum gluing strength.
First pressure roller driven and two idle pressure rollers.
Double motor end trimming unit with straight and chamfer capability. Chamfer up to 15ï‚°. Program controlled indexing from straight to bevel end trimming.
Fine trimming unit with digital system. Tilt range 0 – 25 . Program controlled indexing.
Contour trimming unit for profile corner trimming.
Sound enclosure with centralized dust extraction outlet.
Scraping unit for rigid PVC edges. Program controlled indexing.
Buffing unit.
Electronic frequency changer for all trimming motors which also incorporates electronic motor brakes.
Electrical components according to UL/CSA Listings.
Technical Specifications
Edgeband thickness 0.4 to 12 mm
Coil cutoff maximum 0.8 x 45 mm
3.0 x 45 mm (PVC)
Edgeband height 12 - 60 mm (1/2" - 2 3/8 ")
Panel length min. 160 mm (6 3/8")
Panel width min. 65 mm (2 3/8")
Panel thickness - min.
- max.
8 mm (5/16")
55 mm (2 3/16")
Feed speed two speeds 14 m/min (46 FPM) and 11 m/min
( 36 FPM ) when using the contour trimming unit the feed speed automatically adjusts to 11 m/min.
Feed motor 2.2 kw (3 HP)
Pressure section First roller driven, two rollers idle
End trim unit - two motors
Cutting speed
Straight cut max. .27 kw (1/3 HP ea)
12,000 RPM
5 x 45 mm (3/16" x 1 3/4")
Fine trimming unit
Tilting range
Cutter speed .55 kw (3/4 HP each)12,000 RPM
Profile trimming unit - top and bottom 0.3 kw (1/2 HP ea - two motors)
Electronic frequency changer
Total power required 7 kw
Machine length 5740 mm (18')
Machine width 1730 mm (68")
Working height 900 mm (35.5")
Total height 1600 mm (63")
Machine net weight (with all stations full) 2200 kg (4840 lbs.)
Electrical connection: 208/230 or 440/480 volt, 3-phase, 60 Hz.
Dust extraction: 2x 100 mm (4"), 1000 CFM.
Compressed air connection: 0.18 CFM per panel, 6 bar (85 PSI).
Automatic Height Adjustment with Top Pressure Beam for All Top Work Stations
PC-16 Program Control
Integrated Electronic Line Control System for Increased Reliability and Diagnostic Assistance
Email for More Information
Request a Quote on Freight
Request a Quote on Financing
