Model: KDF 530C Edge Bander

Electrics: 480 volt 3PH

Vintage 2007

Serial # 0-261-02-3588

0.4 – 8 mm (1/64″ – 5/16″) Edge capacity, Panel thickness 12 – 55 mm (1/2″ – 2-3/16″), Minimum panel length 160 mm (6-3/8″) and 65 mm (2-1/2″) minimum width

Equipped with Integrated Line control – No limit switches used for setting workstation function

Joint Trimming Unit for pre-trimming of the workpiece prior to gluing- (2) 3 HP motors – (1) Clockwise and (1) Counterclockwise, 12,000 RPM; Vertical spindle via digital settings – Horizontal positioning via electro – pneumatic control

Universal Automatic Magazine for Strip and Coil Feeding with strengthened precutter for cutting PVC from the coil – 800 mm Diameter coil table for large 3 mm PVC coils

Glue Station – Quick heat up Granulate Gluing System with quick change tank for easy maintenance and glue color change, includes reversible rotation of glue application roller; Pressure Section with (1) large driven pressure roller and (2) secondary rollers with controlled side pressure

End trim Station – Straight-Chamfer 0 to 15° – (2) 1/4 HP – 12,000 RPM motors; program controlled indexing from straight to bevel end trimming

Fine Trimming Station – (2) ¾ HP – 12,000 RPM motors; Servo Motor Positioning of the side copy rollers

Contour Trimming Unit – (1) ½ HP – 12,000 RPM motor; For corner rounding of thick PVC Edges

Scraping Station with Knives – For scraping of roughly trimmed PVC edges in order to remove cutter marks; program controlled pneumatic indexing

Top & bottom buffing Station – 2,800 RPM motors, inclinable vertically and horizontally

Feed chain track speed – (2) Speeds: 36 FPM when contour trimming, otherwise 46 FPM; 3 HP feed drive

Equipped with digital height indicator, Electronic Frequency Changer for all trimming motors

Note: There may some variances in the above features.