2016 Giben G4 EVO 49 Feed Through CNC Router
A late model CNC Router cell (with Infeed and Offloading capacities) at LESS THAN 1/2 PRICE OF NEW!! Same machine as Andersen's EVO model.
|Price:||$59,500.00 -or- as low as $1,202.49/mo.*|
|General Location:||South West|
CNC Router (3-axis)
|Model:||G4 EVO 49|
|Year of Manufacture:||2016|
|Electric||208/240/480 volt, 60 cycle, 3 phase|
2016 Giben G4 EVO 49 CNC Router Feed Through Cell
A Late Model Feed through machine. Under power for inspection!
Load the infeed with a full lift of sheet goods, tell the machine what to cut and it will load the sheets one at a time...cut then....then push the cut parts off, all while vacuuming the spoilboard and loading the next sheet at the same time!!
Table Size; 2700mm x 1300mm (4FT X 9FT) (Cast Iron topped with Hardened PVC/Phenolic Grid table)
Router Spindle: 15 Hp ANDI HSK-63f air cooled spindle 1,000 – 24,000 RPM
Drill Block; 5 x 5 Vertical
Vacuum Pump; One 10hp Becker vacuum pump
Tool Change; 8 position carousel tool changer with indexing system
Auto Lubrication; Yes
Maximum feed rate;
X-axis 80 m/min
Y-axis 80 m/min
Z-axis 30 m/min
Vacuum Pump; Becker 10hp (250 cubic meter/hour)
|Rigger:||Required on selling end
Required on buying end