- Used LOEWER DiscMaster 3DBB
- Serial #10425
- Manufactured 2004
- Very good condition, completely cleaned and re-furbished
- Limited warranty offered
- 460 Volt, 3 Phase, 60Hz
Disc-Station: - 6 sanding discs 250mm (10”) diameter, each with 24 keyways 75mm (3”) long
- Gearmotor 1 @ 1.5 kW (2HP)
- Clockwise/Counter-clockwise disc rotation via selector switch
- Variable disc speed 50-300 rpm by frequency converter and potentiometer
- Disc station oscillation by 0.37 kW (0.5 HP) gearmotor, variable by frequency converter and potentiometer with on/off selector switch
- Separate manual height adjustment of the disc-station (to run discs only or rollers only or everything together)
Rotating Roller Spindles: - Two spindles 90° to the feed, spindle diameter 50mm (2”), for maximum brush diameter 400mm (16”)
- Strong gearmotor each 2.2 kW (3HP) with external coolers
- Variable spindle speed 14-300 rpm by frequency converter and potentiometer with selector switch for on and off
- First spindle turning with the feed, second spindle against the feed
- Powered raise and lower via pushbutton with scale
Basic Machine: - Spring loaded hold down rollers for holding down narrow work pieces, pre-adjustable in height, linked to height adjustment of spindles
- Vacuum feed belt to hold down small work pieces with strong vacuum motor 4 kW (5HP)
- Through feed by feed belt with variable speed 3-15m/min (8-50 ft/min) by 1.5 kW (2HP) gearmotor by frequency converter and potentiometer with on/off selector switch
- Automatic centering of feed belt, pneumatically controlled
- Constant height of through feed, possible to put machine in finishing line
- Maximum height of work piece 100mm (4”)
- pneumatic oscillating blowing device for cleaning the work piece at the end of the machine
- Control panel at left side from infeed
- Completely enclosed machine frame
- Emergency off pull line at infeed and outfeed
- Infeed control with emergency stop if work piece is too thick
- Emergency off by opening doors
- 480V, 60Hz, 3PH, air connection 6-8 bar
- Dust extraction outlets, 4 x dia. 140mm (5.6”) (rollers) and 1 x dia. 100mm (4”) (vacuum)
- Plexiglas windows both sides
Technical Data: Max. working width | 1350mm (53”) | Max. thickness of work piece | 100mm (4”) | Motor disc station | 1.5kW, 50-300rpm | Motor sanding roller | 2x2.2kW, 14-300rpm | Diameter sanding roller | Max. 400mm (max. 16”) | Speed of feed belt | 3-15m/min (8-50 ft/min) | Length/width | 90” x 77” |
US standards in measurement are an approximation
|