Edgebanders > Edgebanders -Single Sided

Brandt KDF 530C Edgebander

This model is well equipped. It has Premill, Corner Rounding and also has Servo Control on yop/bottom trim!!

MA ID: EBS-11889
Price: $24,900.00 -or- as low as $503.23/mo.*
General Location: North East
Category:

Edgebanders -Single Sided

Manufacturer: Brandt
Model: Optimat KDF 530C
Year of Manufacture: 2008
Condition: Very Good
Electric multi volt, cycle, phase
Brandt Optimat KDF 530C

Edge Capacity; 0.4 - 8 mm (1/64" - 5/16")

Panel Thickness;  12 - 55 mm (1/2" - 2-3/16")

Minimum Panel Length; 160 mm (6-3/8") and

Minimum Panel Width; 65 mm (2-1/2")  

Equipped with Integrated Line control - No limit switches used for setting workstation function

Joint Trimming Unit (Premill) of the work-piece prior to gluing; (2) 3 HP motors - (1) Clockwise and (1) Counterclockwise, 12,000 RPM; Vertical spindle via digital settings - Horizontal positioning via electro-pneumatic control

Panel Pre-heater; A quartz heater pre-heats the panel edge for better glue adhesion 

Universal Automatic Magazine for Strip and Coil Feeding with a strengthened pre-cutter for cutting PVC from the coil - 800 mm Diameter coil table for large 3 mm PVC coils

Quick heat up Granulate Gluing System with "quick change tank"  for easy maintenance and glue color change, includes reversible rotation of glue application roller;

Post application Glue heat; Maintains temp for better adhesion  

Pressure Section with (1) large driven pressure roller and (2) secondary rollers with controlled side pressure

End trim Station; Straight or Chamfer 0 to 15° - (2) 1/4 HP - 12,000 RPM motors; program-controlled indexing from straight to bevel end trimming

Fine Trimming Station; (2) ¾ HP - 12,000 RPM motors; Servo Motor Positioning of the side copy rollers

Contour Trimming Unit;   (1) ½ HP - 12,000 RPM motor; For corner rounding of thick PVC Edges

Scraping Station with Knives;  For scraping of roughly trimmed PVC edges in order to remove cutter marks; program controlled pneumatic indexing

Top & Bottom Buffing Station - 2,800 RPM motors, inclinable vertically and horizontally

Feed chain track speed - (2) Speeds: 36 fpm when contour trimming, otherwise 46 fpm-(15mpm)  3 HP feed drive

Equipped with digital height indicator, Electronic Frequency Changer for all trimming motors

Comes with multi-tap transformer

Has been cleaned & checked and is ready to go 

Rigger: Not Required
All Information including Photos and Videos are supplied by a 3rd party Source.
Please confirm all data before committing to a purchase.
*Subject to credit approval. Additional programs available.