Panel Dimensions • Length 90 mm – 3,000 mm • Width 70 mm – 1,000 mm • Thickness 8 (*) - 60 mm (*) If length is more than mm 2.000 the min. thickness increases to 13 mm. Working Fields of the tools (the dimensions refer to tool axis) Length (X) Width (Y) Vertical holes From 0 to 3000 mm from 0 to 1000 mm Vertical Line Boring From 0 to 3000 mm from 32 to 1000 mm Horizontal holes in X From 0 to 2800 mm from 0 to 1000 mm Horizontal holes in Y From 0 to 3000 mm from 90 to 1000 mm Routings (continuous with electrospindle) (partial with electrospindle) From 0 to 2500 mm From 0 to 3000 mm from 0 to 950 mm Grooves (continuous with sawblade) in X (partial with electrospindle) From 0 to 2500 mm From 0 to 3000 mm from 112 to 1000 mm Main Structure The monolithic machine base is made up of thick electro welded steel sheets with structural cross-members precisely located to provide an extremely rigid platform. The machine base is precision processed in a single positioning to achieve the highest mechanical precision. - WORKTABLES AND PRESSING TABLES
- SIDE WORKTABLES AND PREARRANGEMENTS
- Each top and bottom operating unit is moved in Z direction by a hardened, ground ball screw and a preloaded female screw; sliding takes place on high precision linear guides and ball runners.
- ELECTRONIC CONTROL OF THE THICKNESS
- The working precision in ‘Z’ of the vertical and horizontal machining’s - on two panels or single panels - is granted by the reading of the exact thickness by means of a precision sensor installed on the LH gripper.
- automatic control of the panel dimensions in ‘Z’: (a) the thickness stored in the program in execution compared to (b) the true thickness of the panels loaded into the machine.
- FULL DIGITAL MOTORIZATION
- LUBRICATION SYSTEM
- Skipper 100 has been awarded with 2006 IWFCHALLENGERS AWARD and the with the SEQUOIA AWARD 2005 as the most innovative product.
- Air Floating LH Side Table
- RH Unloading Conveyor with Belts
- DEVICE FOR THE CONTROL of the X and Y panel dimensions
- Inverters – static frequency converter
- 3.5 Kw (4.8 HP) electrospindle (x2) with HSK D-50 adaptor
- HSK D-50 Tool –Holders ERC32 – RH rotation
- ERC 32 ELASTIC COLLET - Dia. 12-13 mm, for tool clamping
- GROOVING SAW UNIT - Diameter 160 mm - 3 kW (4.2 Hp) - Fixed direction in ‘X’.
- Transformer for voltage different from 380/400/415 Volt 50/60 Hz
|