Finishing > Sand/Denib/Clean


MAKOR "LP-8" PROFILE SANDER (FEED-THRU-MOULDING). A perfect machine for high gloss finishes!

MA ID: FSA-11978
Price: $44,500.00 -or- as low as $899.34/mo.*
General Location: Eastern Canada


Manufacturer: MAKOR
Year of Manufacture: 2000
Condition: Very Good
Electric 460 volt, 60 cycle, 3 phase
Hours on meter: ?
Makor LP-8 Profile Moulding Sander

(8) Sanding stations, 7-7/8" max. width & 3-1/8" thickness cap. ; (3) triangular belt design sanding heads, independently mounted columns, each with 4 HP motor, variable speed from 100-2,750 RPM; approx. tilting range 120 degrees.

Feed Drive: 4 HP Gearbox feed drive; feed speeds from 23-115 FPM, Segmented rough top rubber wheel hold downs; Lineshaft drive under the length machine with right-angle take-off to each belt segment.

Sanding Wheels: (5) Abrasive wheel/Disc-type sanding heads each with 4 HP motor dual speed for 700 or 1,400 RPM arbor, abrasive wheel dia.; units are independently mounted on their own columns.

Heads Configuration: 

  • Head 1: Right Side, 6" sanding belt, electrically positioned up/down, in/out, tilt. --
  • Head 2: Fright Side 6" sanding belt, electrically positioned up/down, in/out, tilt.--
  • Head 3: Left Side, 6" sanding belt, electrically positioned up/down, in/out, tilt. --
  • Head 4: Left/Top/Bottom, Rotary sanding head, approx. 4.5" shaft length. --
  • Head 5: Right /Top /Bottom, Rotary sanding head, approx. 4.5" shaft length. --
  • Head 6: Right / Top / Bottom, Rotary sanding head, approx. 4.5" shaft length. --
  • Head 7: Left / Top /Bottom, Rotary sanding head, approx 4.5" shaft length. --
  • Head 8: Left / Top / Bottom, Rotary sanding head,approx 9" shaft length.
  • Head 6 and 7 are directly opposing, can be Left and Right, or 1 head can be top or bottom (but not both).

Features: Tilt Adjustments: Universal movement of horizontal, vertical and tilt adjustment with wheels #1 - #3 & #4 at approx. +/-75 degrees from vertical top to horizontal, wheel #2 (bottom wheel) with -15 degrees to + 45 degrees from bottom vertical. -- Wheel@5 is universal with a 360 tilt rotation. -- Heads 4 - 8 have automatic wear compensation. -- Position & degree adjustments dovetail slides by hand wheel with digital indicators. 

Complete with: 8" Wide abrasive belt capacity. belt oscillation on/off, interchangeable from profile pads & electronically timed/programmable movement of pad, pneumatic belt tension, pneumatic blowers for cleaning & cooling of belts. --Main electrical cabinet with controls, PLC controller & manual override with individual buttons. -- Operator/Parts/ PLC manual and elect drawing are included. 


This machine was used in the production of the Victoria Secrets stores with the high gloss mouldings and have the look of the high gloss polyester. The only way this can be done is with a machine that can sand the sub-straight to a great deal of perfection for that high gloss finish will have the proper appearance. This machine has been refurbished.








Shipping Footprint: 15' 6" (length) x 6' (width) x 7' (height)
Weight: 4000 lbs
Rigger: Not Required
All Information including Photos and Videos are supplied by a 3rd party Source.
Please confirm all data before committing to a purchase.
*Subject to credit approval. Additional programs available.