Used ProTech Model PT-7 Radius Forming Clamp

MA ID: CFD-01496
Internal ID: 10961
Category: Clamps - Frame/Door/Misc
Location: Williamsport, PA 17701
Price: $25,000  -or-  as low as $505.25 mo.*
*Subject to credit approval. Additional programs available.
Manufacturer: RFS Protech
Model: PT-7
Year of Man.: 2002
Serial #: HMC10961

Used RFS ProTech Model PT-7 Radius Forming Clamp.
ProTech radius formers are the modern way to fabricate curved laminates such as arched headers and radiused mouldings for windows and doors. Utilizing their patented technology they eliminate the traditional method of building and storing wooden forms. The PT-7 radius former uses a series of machined tails supporting dual sets of aluminum arms, which are adjusted to define the pattern to be fabricated. The provided computer program is used to set-up parameters. The software guides the user through a series of questions (shape diameter, springback, etc) that geometrically define the pattern. The software then calculates the exact position for each aluminum arm and generates a printout to aid the operator in manually positioning the arms. The laminates (veneers) are clamped to the form arms with a series of 32 specially designed pnuematic clamps. Compressed air at presssures up to 150 PSI is connected to the clamp via a quick disconnect.

Specifications:
Maximum part length is 120"
Standard part height of 54"
Maximum Width: 7"
Maximum part thickness: 4-1/2"

Approx. Year Mfg: 2002

New Replacement cost $40,000

Condition: Fair
Rigger: Not Required