Unique 325 Shape & Sand

MA ID: DSS - 5301
Status: Sold
Price: $16,995.00
Category:

Door & Stair Shapers

Misc Door/Stair Machines

Manufacturer: Unique
Model: 325
Year of Manufacture: 2004
Condition: Very Good
Electric: 440 Voltage 60 Cycle 3 Phase

Specifications

• (2) Main Shaper heads; 7.5 HP BALDOR belted CW/CCW reversible drive motors independently controlled by
separate variable frequency drives; speed range from 6,000 to 7,500 RPM.
• Non-tilting, 1-1/4" spindle diameter with 5" stacking capacity, pneumatic positioning with (3) position rotating
turret height stops.
• Heads are adjustable in both vertical and horizontal directions.
• (2) Sanding Heads; 1 HP BALDOR motor CW/CCW reversible belted motor drives, independently controlled
by separate variable speed drives; speed range from 0 - 1,500 RPM.
• Non-tilting 1" dia. spindle with 5" stacking capacity for up to 8" dia. sanding heads.
• Heads are adjustable in both vertical and horizontal directions, and include horizontal and vertical numeric
position indicators in 0.001" increments.
• Sanding stations are equipped with (6) air jets per sanding station to minimize dust build up on sanding
abrasives.
• Each of the shaper heads can be brought up pneumatically as a set or individually. Thus allowing the operator
to keep each head set up to run a designated profile without the need to break down the machine or cutters in
between. The same can quickly be done as well with each sanding head although manually.
(2) Main Shaper heads; 7.5 HP BALDOR belted CW/CCW reversible drive motors independently controlled by separate variable frequency drives; speed range from 6,000 to 7,500 RPM.
• Non-tilting, 1-1/4" spindle diameter with 5" stacking capacity, pneumatic positioning with (3) position rotating turret height stops.
• Heads are adjustable in both vertical and horizontal directions. 
• (2) Sanding Heads; 1 HP BALDOR motor CW/CCW reversible belted motor drives, independently controlled by separate variable speed drives; speed range from 0 - 1,500 RPM.
• Non-tilting 1" dia. spindle with 5" stacking capacity for up to 8" dia. sanding heads.
• Heads are adjustable in both vertical and horizontal directions, and include horizontal and vertical numeric position indicators in 0.001" increments.
• Sanding stations are equipped with (6) air jets per sanding station to minimize dust build up on sanding abrasives.
• Each of the shaper heads can be brought up pneumatically as a set or individually. Thus allowing the operator to keep each head set up to run a designated profile without the need to break down the machine or cutters in between. The same can quickly be done as well with each sanding head although manually.

 


All Information including Photos and Videos are supplied by a 3rd party Source.
Please confirm all data before committing to a purchase.
*Subject to credit approval. Additional programs available.