3 mm Perfect - End Trim, T & B Trim, Scrape and Buff
MA ID: | EBS - 9170 |
Status: | Sold |
Price: | $7,250.00 |
Category: |
Edgebanders -Single Sided |
Manufacturer: | HolzHer |
Model: | HH model 1402 MF PVC |
Year of Manufacture: | 1999 |
Condition: | Good |
Electric: | 230 Voltage 60 Cycle 3 Phase |
Hours on meter: | NA |
(1) USED Model 1402 MF PVC Edgebander For edgestrip thickness up to 0.3 - 5 mm, feed speed 11 m/min. Including conveyor chain, pressure beam, protective hood with safety lock, central connection for dust suction, frequency inverter, sliding support rail and swivel control cabinet 230 V 60 Hz 3 Phase BENEFITS:
FEATURES:
Machine Equipped as follows: MODEL 1901 EDGESTRIP MAGAZINE - With automatic operation for coiled and strip material - Execution with heavy-duty edgestrip guillotine (up to 3 mm thick PVC)
MODEL 1906-M GLUING STATION - “CARTRIDGE SYSTEM” - Equipped with HOLZ-HER'S exclusive patented "CARTRIDGE" glue system. This is a CLOSED APPLICATION SYSTEM in which the glue is enclosed in an air- tight chamber and cannot oxidize, discolor, burn, or become contaminated with wood dust. This allows for optimum glue adhesion. - Glue applied to panel by patented GLUE NOZZLE from 6-45mm workpiece thickness. - Precise control of all functions including begin and end of glue line, height of glue line, bottom of glue line, volume of glue and face melt temperature. - Less maintenance - no glue pot to clean, fewer parts. - Efficient glue consumption - virtually no waste. - Efficient power consumption - uses less than half that of conventional glue pots. - Fastest & easiest glue color change, 5-10 min. - Fastest heat-up time in the industry, 3-5 min. - No fumes or other environmental hazards. - Machine can be used for trimming without heating up the glue section.
MODEL 1912 PRESSURE UNIT - With large electronically-driven roller synchronized with feed speed, to achieve high gluing pressure and precise banding - Quick adjustment of pressure section to edge thickness
MODEL 1976K END TRIM UNIT - Two high frequency motors for cutting the leading and trailing edges with a sweep cut. - Mounted with uni-point axis for no re-indexing when changing from flush to bevel end trim - Mechanically indexes ends for a perfect finish. - Motors: 2 x .22 KW (30 HP), Speed 9,000 RPM. - Maximum edgestrip size: 13 mm x 66 mm. - Maximum edge thickness up to 3mm.
MODEL 1942-M COMBINATION FLUSH, CHAMFER & RADIUS TRIM UNIT - Two high frequency motors for edge trimming 0 to 15 degrees. - Vertical and horizontal tracing with uni-point design for no second adjustment when changing the degree of bevel. - Maximum edgestrip thickness: 8 mm. - Air jets for debris removal. - Radius capability up to 3 mm radius. - Motor: 2 x 0.6 KW (.82 HP), 300 HZ, Speed 18000 RPM. - Digital counters included.
Model 1929 Scraping Station Unit - Scraping for 3 mm for softedge and PVC materials
MODEL 1940 BUFFING UNIT - For cleaning and edge chamfering with 2 cloth wheels, tilting scope 5° 230 V 60 HZ Machine is clean and was operating as taken from service. Unknown changes are beyond our vision. Used machinery is offered as - As Is, Where Is, Condition. No Warranty is offered or Implied
|
|
Shipping Footprint: | 12 (length) x 4 (width) x 4 (height) |
Weight: | 3000 lbs |
Please confirm all data before committing to a purchase.
*Subject to credit approval. Additional programs available.