Hoffmann Double Miter Saw - Like New

MA ID:

SCM - 6937

Status:

Archived

Price:

$21,500.00

Category:

Cutoff/Miter/Toe Notchers

Manufacturer:

Hoffmann

Model:

MS-35-SF

Year of Manufacture:

2001

Condition:

Excellent

Electric:

240 Voltage 60 Cycle 3 Phase

The MS35SF Double Miter Saw is designed to simultaneously cut a left and right hand miter with each machining cycle. Upon cutting the miters, the saw blades retract and the rougter carriage moves upward routing one or two dovetail keyways in the mitered ends. The heavy-duty design of the saw heads and the routing carriage, precision machines components as well as the sue of industrial quality carbide tipped saw blades assures perfect cuts with no burrs or tear out, even on difficult to process material (such as foil or paper wrapped MDF moulding). The location of each keyway as well as the routing height is fully adjustable to suit a wide range of applications. In addition, the MS35SF can also be used as a production double miter saw for wood, non-ferrous metals and plastics by switching off the routing operation.

Typical Applications include:

mitered cabinet doors, compound mitered crown moulding, furniture components, compound mitered lighting fixutres, trophy bases, game tables, mitered picture frames, curio cabinets, architectural millwork products, jewelry and novelty boxes, bulletin boards, door and window casings, spa enclosures, base frames

The Hoffmann MS35SF Double Miter Saw is equipped with two sawing and routing stations, mounted at a fixed 90 degree angle to each other. Each station consists of a sawblade to cut the material, and a routing head to rout either one or two dovetail keyways per miter. Solid hard and softwood as well as panel products like MDF, MDO, particleboard, and plywood can be cut to size and routed for Hoffmann dovetail keys in one cycle. Different routing heights can be set for each position to allow the processing of profiled moulding or material joined with a compound miter. The key locations can be adjusted by the operator from 1/4" - 3 1/8" = 6-80mm, measured from the tip of the mitered end. These adjustments are displayed on calibrated "SIKO" counters, assuring perfect repeatability. The material is placed onto the material support on the left side of the machine. The operator actuates the pneumatic foot switch to secure the workpiece with eight pneumatic clamps. These clamps are mounted behind the sawblade guard for added safety. Once the material is secured, the operator must press two buttons at the front of the machine simultaneously to initiate the cutting and routing cycle. This two-hand-control design forces the user to have both hands out of harms way.

Machining Sequence

Sawblades cut through material and retract up to their home position.
Both halves of the machine table move approx. 18" apart to create a space for the routing heads.
Routing heads move up to rout the first key location, then down, over and up again to rout the second location.
The tables move back to the center of the machine and the pneumatic clamps release the material.

The MS35SF is equipped with a 7 3/4" wide aluminum fence on the right side of the machine. This fence is 63" = 160cm long, longer lengths are available. The width of 7 3/4" assures sufficient support, even for wider material. Moving the stop assembly to the desired location and locking it in place sets the workpiece length. The length measurement is shown directly on the stop assembly with a digital display, the accuracy is .001" = .01mm. The operator can change the display from fractional inches to decimal inches or decimal millimeters.

An infeed material support table is supplied for the left side of the machine, the length is 63" = 160cm.

Standard Features

The Hoffmann MS35SF is shipped ready for operation, including infeed support table, right hand side fence system with digital display, solid carbide router bits, air filter, air regulator, and oil lubricator assembly installed, two-hand safety operation, separate flow control valves for sawblade and routerhead feed rate, emergency-stop-switch, manual and toolkit.

Power Supply	220 Volts, 3 Phase, 60 Cycles, 15 Amperes
Air Supply	90 psi
Max. Material Height	96", longer lengths possible with extended fence and table
Installed Router Bit	Hoffmann solid carbide router bits, W-1, W-2, W-3
Dust Collection	two dust collection ports, 4" diameter, 400cfm each
Router heads	two motors @ 450 Watt, 24,000 rpm, 6.00mm collet
Saw heads	two motors @ 2 1/2 HP, 3,470 rpm
Saw Blades	350mm diameter, 30mm bore, carbide tipped
Cutting capacity	3 1/2" max. width, 4" max. thickness

Shipping Footprint:

72 (length) x 50 (width) x 88 (height)

Weight:

1800 lbs

All Information including Photos and Videos are supplied by a 3rd party Source.
Please confirm all data before committing to a purchase.
*Subject to credit approval. Additional programs available.