- Vertical Frame and Notching Saw
- *Blade Capacity: 13"
- *2 H.P. 3phase
- *Magnetic Starter
- *3450 RPM
- *Cutting Capacity:
- Toe Notch Con g.: 4½"X4½" deep X3" high
- Mitre: 3½ (wide) X 3"
CTD N80 Notching and Mitering Saw
Cleaned, Checked, Airline replaced
13" OD (330mm); saw blades not included.
Arbor
1" (25mm) with 3" (76mm) saw collars; mounted on preloaded and sealed bearings; 2-belt drive; 3450 RPM of spindle.
Motors & Voltages
Two, 2 H.P. 3 Phase 230/460 Volt Totally Enclosed Fan Cooled Motors, 60 Hz, 3450 RPM with Dual Magnetic Starter; 3 H.P. Motors available.
Table Base
Precision machined and ground iron castings with milled keyways to guide fences; allows for easy and accurate dimensional changes.
Floor Stand
Heavy gage steel; stand is completely enclosed with 6" (152mm) dust collector outlet and scrap chute; 1200 CFM required.
Actuation
Air operated by foot valve with cover.
Air Pressure & Consumption
3 CFM at 80 PSI (.09 cubic meters/minute at 5.6 kg/cm2) based on 10 strokes per minute; includes air filter/ regulator/lubricator with auto drain.
Size & Weight
43" (109cm) Wide x 38" (97cm) front to back x 58" (147cm) High; Weight 750 lbs. (340kg).
Production Rate
Up to 15 strokes per minute.
Cutting Capacity
Staggered Saw Blades/ Toe-Notch Configuration; 4-1/2" (114mm) x 4-1/2" (114mm) Deep x 3" (76mm) High
Mitre Cutting/Staggered Saw Blades; 3-1/2" (89mm) Wide x 3" (76mm) High
Mitre Configuration/Non-Staggered Saw Blades; 3-3/8" (86mm) Wide x 3" (76mm) High